Operational instruments of the Royal Observer Corps
The Royal Observer Corps (ROC) was a civil defence organisation operating in the United Kingdom between October 1925 and 31 December 1995, when the Corps' civilian volunteers were stood down. (ROC headquarters staff at RAF Bentley Priory stood down on 31 March 1996). Composed mainly of civilian spare-time volunteers, ROC personnel wore a Royal Air Force (RAF) style uniform and latterly came under the administrative control of RAF Strike Command and the operational control of the Home Office. Civilian volunteers were trained and administered by a small cadre of professional full-time officers under the command of the Commandant Royal Observer Corps; a serving RAF Air Commodore.
This sub article lists and describes the instruments used by the ROC in their nuclear detection and reporting role during the Cold War period.
Initial detection of nuclear bursts on the UK
- Atomic Weapons Detection Recognition and Estimation of Yield known as AWDREY was a desk mounted automatic instrument, located at controls, that detected nuclear explosions and indicated the estimated size in megatons. Operating by measuring the level of electro magnetic pulse (EMP) the instruments were tested daily by wholetime ROC officers and regularly reacted to the EMP from lightning strikes during thunderstorms. [1] AWDREY was designed and built by the Atomic Weapons Establishment at Aldermaston and tested for performance and accuracy on real nuclear explosions at the 1957 Kiritimati (or Christmas Island) nuclear bomb test (after being mounted onboard a ship). Reports following a reading on AWDREY were prefixed with the codeword "Tocsin Bang".
- The Bomb Power Indicator or BPI consisted of a peak overpressure gauge with a dial that would register when the pressure wave from a nuclear explosion passed over the post. When related to the distance of the explosion from the post this pressure would indicate the power of the explosion. Reports following a reading on the BPI were preceded by the codeword "Tocsin".
- The Ground Zero Indicator, or GZI or shadowgraph, consisted of four horizontally mounted cardinal compass point pinhole cameras within a metal drum, each 'camera' contained a sheet of photosensitive paper on which were printed horizontal and vertical calibration lines. The flash from a nuclear explosion would produce a mark on one or two of the papers within the drum. The position of the mark enabled the bearing and height of the burst to be estimated. With triangulation between neighbouring posts these readings would give an accurate height and position. The altitude of the explosion was important because a ground or near ground burst would produce radioactive fallout, whereas an air burst would produce only short distance and short lived initial radiations (but no fallout).
- The Radiac Survey Meter No 2 or RSM was a 1955 meter which counted the particles produced by radioactive decay. This meter suffered from a number of disadvantages: it required three different types of obsolete batteries, it also contained delicate valves that were liable to failure and it had to be operated from outside the protection of the post. These were favored as they had been tested on fallout in Australia after the Operation Buffalo nuclear tests, and remained in use until 1982 by commissioning a manufacturer to regularly produce special production runs of the obsolete batteries. Within the ROC the RSM was only used at post sites for three years when it was superseded in 1958 by the FSM and the RSM retained only for post attack mobile monitoring missions.
- The Fixed Survey Meter or FSM introduced in 1958, could be operated from within the post with a cable leading to the detector mounted externally and protected by a polycarbinate dome. The FSM used the same obsolete high voltage batteries as the RSM. In 1985 this instrument was replaced by the PDRM 82(F).
- The PDRM82 (F) was the fixed desktop version of the new Portable Dose Rate Meter, that were manufactured by Plessey and introduced during the 1980s, gave more accurate readings and used standard 'C' cell torch batteries that lasted many times longer, up to 400 hours of operation. The compact and robust instruments were housed in sturdy orange coloured polycarbinate cases and had clear liquid crystal displays. The PDRM82 (F) had a remote sensor, mounted above ground under a polycarbinate dome and connected down a steel probe-pipe to the instrument by a coaxial cable.
Portable measurement of radiation during Mobile Monitoring missions
- The Radiac Survey Meter No 2 or RSM was a 1955 meter which counted the particles produced by radioactive decay. Having been superseded within the ROC by the Fixed Survey Meter the RSM remained in use only for post attack mobile monitoring missions in a post attack period.
- The PDRM82 or Portable Dose Rate Meter was the standard portable version of the new meters, that were manufactured by Plessey and introduced during the 1980s, giving more accurate readings and using standard 'C' cell torch batteries that lasted many times longer, up to 400 hours of operation. The compact and robust instruments were housed in sturdy orange coloured polycarbinate cases and had clear liquid crystal displays. The radiac sensor was self contained within the casing.
Measurement of personal absorptions
- The Dosimeter pocket meters were issued to individual observers for measuring their personal levels of radiation absorption during operations. Three different grades of dosimeter were used, depending on ambient radiation levels. The original hand wound and temperamental dosimeter charging units were replaced during the 1980s by battery operated automatic charging units.
References
See also